A 4kw submersible solar water pump was installed in a spring catchment area and pumped water 750 meters to a Hospital to supply water for daily needs. The installed pump has a capacity to pump 8500 liters per hour and is fully automated.
Technical data
Solar Array: 4.41KWp
Pump type and controller: Lorentz PS2-4000 C-SJ8-15
Installation pictures
Image1: Ground Mounted Solar Array Image 2: Pump Tripod Stand
A 4kw submersible centrifugal solar water pump has been installed by Power Providers Tanzania to our client at Lake Tanganyika for the purpose of pumping water from the lake Tanganyika to three fish ponds/dams near the area. The installed pump has the power to pump water for a distance of 500m from the water source to the reservoir and has a flow rate of 26 m3/h which is equal to 26000 liters per hour. The total array size of the whole system is 6.6 KW.
A 4kWp ground mounted Solar array powering a stand alone Solar Power System for a Tented Camp in Iringa Region. The system is 100% solar powered and powers all the important appliances needed by our client.
A battery bank with capacity of 400 Ah @C20, 48VDC system voltage and other components to support the installed solar power system.
Submersible centrifugal 4kW solar pump was installed to provide 35m3/day in least sunny conditions (January) and run for about 1 km to the final delivery tank of 40,000l. From there, water is distributed within the training college for daily consumption.
The installed 5.5kW ground mounted solar array produces 83m3 of water a day (in the least sunny month of January) from a balancing and sump tank to a final delivery tank over 4 kilometers away. From there, water is distributed to several distribution points in the village of Lumpembe Lwasenga and overflow from the tanks goes to nearby farms. It is a magical feeling to flick the switch on the pump controller and to see so much water appearing so far away.
Power Providers Tanzania 